National Instruments FieldPoint FP-TB-10 Operating Instructions Manual Download | Manualshive

Page: 1 / 22

background image

322717C-01

June 2002

©

2000–2002 National Instruments Corp. All rights reserved.

FieldPoint™, National Instruments™, NI™, and ni.com™ are trademarks of National Instruments Corporation.
Product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering National Instruments products, refer to the appropriate location:

Help»Patents

in your software,

the

patents.txt

file on your CD, or

ni.com/patents

.

FieldPoint Operating Instructions

FP-TB-10

Terminal Base and Dual-Channel
FieldPoint Modules

These operating instructions describe the installation, features, and
characteristics of the FP-TB-10 terminal base and of the various
dual-channel modules that work with it. For details on configuring
and accessing these modules over a network, refer to the user
manual for the particular FieldPoint network module you are using
with the dual-channel system.

Features

The FP-TB-10 and the dual-channel FieldPoint modules have the
following features:

•

High granularity of system design with up to six dual-channel
I/O modules per terminal base

•

Any combination of I/O types in each terminal base

•

Independent isolation of each dual-channel I/O module

FieldPoint dual-channel I/O modules offer maximum flexibility in
configuring I/O systems. You can mount up to six dual-channel
modules in any combination on the FP-TB-10 terminal base. You
can mix dual-channel modules with standard eight- and 16-channel
modules in a single FieldPoint bank. Therefore, you can configure
your FieldPoint system to match your specific I/O needs,
minimizing the size and cost of your distributed I/O system. In
addition, the dual-channel modules provide a flexible solution for
applications requiring channel-to-channel isolation.

1
2
3
...
»

Summary of Contents for FieldPoint FP-TB-10























Reviews:

No comments

Related manuals for FieldPoint FP-TB-10

Brand: VeriFone Pages: 39

RealPOS X Series

Brand: NCR Pages: 6

Brand: CCV Pages: 45

Brand: XtendLan Pages: 70

Brand: Dojo Pages: 37

Brand: Hamilton Pages: 14

Brand: Datavan Pages: 67

Brand: Pax Technology Pages: 2

Brand: Pax Technology Pages: 8

Brand: Mswipe Pages: 48

Cinterion BGS5T USB

Brand: Gemalto Pages: 50

Brand: Custom Audio Electronics Pages: 20

Brand: Custom Audio Electronics Pages: 32

Verifone VX 520 PEDPack

Brand: Tailwind Pages: 2

Brand: Hanasis Pages: 11

Brand: Raisecom Pages: 61

Brand: CCV Pages: 14

Brand: CCV Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands