Index
©
National Instruments Corporation
Index-5
Go To Local (GTL) command, 6-9
GPIB
ANSI/IEEE standard 488.1-1987, F-1
configuring devices on bus, F-7
connecting devices on bus, F-6 to F-7
message types, F-1
overview, F-1
signals and lines
data lines, F-4
handshake lines, F-4 to F-5
interface management lines, F-5
Talkers, Listeners, and Controllers,
F-2 to F-3
GPIB addresses
changing with caddr function, 5-4 to 5-5
lists of addresses for S mode
functions, 4-5
S mode function argument, 4-4 to 4-5
GPIB characteristics
G mode defaults and functions for
changing (table), 6-10
S mode defaults and functions for
changing (table), 4-7
GPIB connector
overview, 1-8
signals and lines (figure), 1-8, F-4
GPIB error codes, C-4 to C-7
EABO, C-6
EADR, C-5
EARG, C-6
EBUS, C-7
ECAP, C-7
ECIC, C-4 to C-5
ECMD, C-7
ENOL, C-5
ESAC, C-6
NGER, C-4
GPIB error conditions returned by stat
function (table)
G mode, 7-15
S mode, 5-46
GPIB functions, G mode
eos, 7-4 to 7-5
list of functions, 6-11
srqen, 7-11 to 7-12
GPIB initialization functions
caddr function, 5-4 to 5-5
eos, S mode, 5-12 to 5-14
eot, 5-15 to 5-16
list of S mode functions, 4-8
onl, S mode, 5-25
rsc, 5-34 to 5-35
tmo, 5-49 to 5-50
GPIB read and write termination methods,
S mode programming
END message, 4-5 to 4-6
EOS character, 4-6
GPIB-232CT-A
hardware overview, 1-2
operation as GPIB device, 6-7 to 6-9
requirements for getting started,
1-1 to 1-2
GPIB-485CT-A, 1-2 to 1-8
AC version front panel, 1-3
GPIB connector, 1-8
operation as GPIB device, 6-7 to 6-9
rear panel, 1-4 to 1-5
requirements for getting started,
1-1 to 1-2
RS-232 connector, 1-6
RS-485 connector, 1-7
side panels, 1-5 to 1-8
top panel, 1-3 to 1-4
Group Execute Trigger (GET) command, 6-9
gts function, 5-17 to 5-18
