background image

If the BIOS setting Restore After Power Loss is set to 

Stay Off

, the IC-3120 may be powered,

but turned off. Use the power button to turn on the device.

Where to Go Next

The following documents and resources contain information you may find helpful as you use
the IC-3120 in an application. Refer to the National Instruments Product Manuals Library at 

ni.com/manuals

 for the most recent versions of product documentation.

IC-3120 Specifications

—Contains detailed specifications for the IC-3120.

IC-3120 User Manual

—Contains connector pinouts, configuration information, mounting

information, and answers to common troubleshooting questions.

NI CVS I/O Accessory User Manual

—Contains installation and operation instructions for

the NI CVS I/O Accessory.

Worldwide Support and Services

The NI website is your complete resource for technical support. At 

ni.com/support

, you have

access to everything from troubleshooting and application development self-help resources to
email and phone assistance from NI Application Engineers.

Visit 

ni.com/services

 for NI Factory Installation Services, repairs, extended warranty, and

other services.

Visit 

ni.com/register

 to register your NI product. Product registration facilitates technical

support and ensures that you receive important information updates from NI.

A Declaration of Conformity (DoC) is our claim of compliance with the Council of the
European Communities using the manufacturer’s declaration of conformity. This system
affords the user protection for electromagnetic compatibility (EMC) and product safety. You
can obtain the DoC for your product by visiting 

ni.com/certification

. If your product supports

calibration, you can obtain the calibration certificate for your product at 

ni.com/calibration

.

NI corporate headquarters is located at 11500 North Mopac Expressway, Austin, Texas,
78759-3504. NI also has offices located around the world. For telephone support in the United
States, create your service request at 

ni.com/support

 or dial 1 866 ASK MYNI (275 6964). For

telephone support outside the United States, visit the 

Worldwide Offices

 section of 

ni.com/

niglobal

 to access the branch office websites, which provide up-to-date contact information,

support phone numbers, email addresses, and current events.

IC-3120 Getting Started Guide

  | 

© National Instruments

  | 

13

Summary of Contents for IC-3120















Reviews: