©
National Instruments Corporation
11
NI 5762R User Guide and Specifications
Figure 5.
NI 5762 - Getting Started (Host) VI Front Panel
Creating a LabVIEW Project and Running a VI on an FPGA Target
This section explains how to set up your target and create an FPGA VI and host VI for data
communication. For more detailed information about acquiring data on your NI 5762R, refer to the
device-specific examples available in NI Example Finder.
Creating a Project
1.
Launch LabVIEW, or if LabVIEW is already running, select
File»New
.
2.
In the
New
dialog box, select
Project»Empty Project
and click
OK
. The new project opens in the
Project Explorer
window.
3.
Save the project as
5762SampleAcq.lvproj
.
Creating an FPGA Target VI
1.
In the
Project Explorer
window, right-click
My Computer
and select
New»Targets and
Devices
.
2.
In the
Add Targets and Devices on My Computer
dialog box, select the
Existing Target or
Device
option button and expand
FPGA Target
. The target is displayed.
3.
Select your device and click
OK
. The target and target properties are loaded into the
Project
Explorer
window.
4.
In the
Project Explorer
window, expand
FPGA Target (RIO
x
, PXI-79
xx
R)
.
5.
Right-click
FPGA Target (RIO
x
, PXI-79
xx
R)
and select
New»FPGA Base Clock
.
6.
In the
Resource
pull-down menu, select
IO Module Clock 0
.
7.
Enter
125 MHz
in the
Compile for single frequency
control and click
OK
.
Summary of Contents for NI 5762
Page 1: ...NI 5762...
