NI 9155 Operating Instructions and Specifications
4
ni.com
more information about PCI Express clock compatibility with the NI 9155, go to
ni.com/
info
and enter the Info Code
915xclock
.
❑
C Series I/O modules
❑
MXI-Express (x1) cable(s) up to 7 m long
❑
DIN rail mount kit (for DIN rail mounting only)
❑
Two M4 or number 8 panhead screws (for mounting the chassis
without one of the listed mounting kits)
❑
Number 2 Phillips screwdriver
❑
Power supply
❑
MXI-Express (x1) for PXI Express User Manual
Notes
Visit
ni.com/info
and enter the Info Code
rdsoftwareversion
to determine
which software you need to use the NI 9155.
Mounting the NI 9155
You can mount the chassis horizontally on a flat, vertical, metallic surface
such as a panel or wall. The maximum allowable ambient temperature for
operation in this kind of mounting configuration is 55 °C. You can also
mount the chassis on a DIN rail, on a desktop, or in a rack. However, only
panel or wall mounting as described in this document enables operation at
the maximum allowable ambient temperature. Any other mounting
configuration can also affect the typical accuracy of modules in the chassis.
Figure 2 shows the chassis mounted horizontally.
Figure 2.
NI 9155 Mounted Horizontally
Note
For more information about how different mounting configurations can cause
temperature derating, go to
ni.com/info
and enter the Info Code
criomounting
.
Up
NI 9155
NI 9155
