©
National Instruments
7
NI 9155 Operating Instructions and Specifications
Figure 6.
Mounting the NI 9155 Directly on a Flat Surface
Caution
Make sure that no I/O modules are in the chassis before removing it from the
surface.
Mounting the Chassis on a DIN Rail Using the NI 9915 DIN Rail Mount Kit
Complete the following steps to mount the chassis on a DIN rail using the
NI 9915 DIN rail mount kit.
1.
Fasten the DIN rail clip to the chassis
using a number 2 Phillips
screwdriver and two M4
×
50 screws. National Instruments provides
these screws with the DIN rail mount kit. Tighten the screws to a
maximum torque of 1.3 N
⋅
m (11.5 lb
⋅
in.).
Figure 7.
Installing the DIN Rail Clip on the NI 9155
NI 9155