You must follow these guidelines to meet the shock and vibration
performance specifications stated in the device datasheet on
•
Panel mount the system.
•
Provide strain relief for the module by securing the cabling to
a supporting fixture no more than 8 cm (3 in.) away from the
opening of the connector backshell.
•
Ensure that the supporting fixture for strain relief is stiff and
rigidly coupled to the chassis mounting surface.
•
Ensure that you do not directionally bias the module when
applying strain relief.
Overvoltage Protection
The NI 9253 provides overvoltage protection for each channel.
Note
Refer to the device datasheet on
for more information about overvoltage protection.
NI 9253 Getting Started Guide
|
© National Instruments
|
11
