NI 9264 Connection Guidelines
Make sure that devices you connect to the NI 9264 are
compatible with the module specifications.
Connecting to a Spring-Terminal Connector
What to Use
•
NI 9264 spring-terminal connector
•
0.08 mm
2
to 1.0 mm
2
(28 AWG to 18 AWG) copper
conductor wire with 7 mm (0.28 in.) of insulation stripped
from the end
•
Flathead screwdriver with a 2.3 mm x 1.0 mm (0.09 in. x
0.04 in.) blade, included with the NI 9264
What to Do
Complete the following steps to connect wires to the spring-
terminal connector.
14
|
ni.com
|
NI 9264 Getting Started Guide
