Figure 7. cRIO-9036 Module Immobilization Accessory Dimensions
329.7 mm (12.98 in.)
1.6 mm
(0.06 in.)
94.2 mm
(3.71 in.)
Mounting the Device
To obtain the maximum allowable ambient temperature of 70 °C, you must mount the
cRIO-9036 horizontally on a flat, metallic, vertical surface such as a panel or wall. You can
mount the cRIO-9036 directly to the surface or use the NI Panel Mounting Kit. The following
figure shows the cRIO-9036 mounted horizontally.
Figure 8. cRIO-9036 Horizontal Mounting
1
1. Up
You can also mount the cRIO-9036 in other orientations, on a nonmetallic surface, on a
35-mm DIN rail, on a desktop, or in a rack. Mounting the cRIO-9036 in these or other
configurations can reduce the maximum allowable ambient temperature and can affect the
typical accuracy of modules in the cRIO-9036. For more information about typical accuracy
specifications for C Series modules and temperature deratings caused by different mounting
configurations, visit
and enter the Info Code
criotypical
.
Caution
Make sure that no C Series modules are in the cRIO-9036 before
mounting it.
Tip
Before using any of these mounting methods, record the serial number from
the back of the cRIO-9036 so that you can identify the cRIO-9036 in MAX. You
will be unable to read the serial number after you mount the cRIO-9036.
NI cRIO-9036 User Manual
|
© National Instruments
|
23
