MID-7604/7602 Power Drive User Guide
26
ni.com
Figure 20.
Half-Coil Stepper Motor Wiring
Figure 21 shows the wiring for a typical 4-wire motor.
Figure 21.
4-Wire Motor Wiring
Specifications
The following specifications apply only to the MID-7604/7602. To obtain
a complete system specification, you must account for your motion
controller. Refer to your controller specifications to determine overall
system specifications.
Some signals have compatibility defined as signal pass-through, which
means the MID-7604/7602 may have passive filtering on these signals but
will not affect the voltage range or current handling capability. Consult
your motion controller specifications to determine the allowable voltage
range and logic level compatibility of the signal.
1
2
3
4
5
Phase A
Phase B
Phase B
Phase A
Ground
Motor Case Ground
Shield
Phase A
Phase A-CT
Phase A-CT
Phase A
Phase B
Phase B-CT
Phase B-CT
Phase B
1
2
3
4
5
Motor Case Ground
Shield
Phase A
Phase A
Phase B
Phase B
Phase A
Phase B
Phase B
Phase A
Ground
