Chapter 2
Installation and Configuration
NI PS-15 Power Supply User Manual
2-4
ni.com
3.
Ensure that the terminal lever is in an open position as shown in
Figure 2-2.
Figure 2-2.
Connecting a Wire
4.
Insert the end of the wire into the terminal until the exposed portion of
the wire is completely inside of the terminal connection as shown in
Figure 2-2. If you are using stranded wire, ensure that all strands of the
wire enter the terminal connection.
5.
Move the lever until the lever snaps into the closed position, as shown
in Figure 2-2.
6.
Repeat steps 4–5 for each of the other terminals.
7.
Ensure that all wires are properly seated and not loose.
8.
Ensure that the rest of your equipment is ready to be powered without
creating a hazard.
9.
Apply MAINS voltage to the NI PS-15 power supply.
Inserting The Wire
Closing The Lever
