Chapter 2
Installation and Configuration
2-12
ni.com
The configuration steps for single- or multiple-chassis systems are the
same.
Figure 2-5.
Multichassis Configuration in MAX
Basic PXI System Configuration
1.
Launch MAX.
2.
In the
Configuration
tree, click on the
Devices and Interfaces
branch
to expand it.
3.
If the PXI system controller has not yet been configured, it will be
labeled “PXI System (Unidentified).” Right-click on this entry to
display the popup menu, then select the appropriate controller model
from the
Identify
As
submenu.
4.
Click on the
PXI System
controller and the chassis (or multiple
chassis, in a multi-chassis configuration) will be listed below it.
Identify each chassis by right-clicking on its entry, then selecting the
appropriate chassis model through the
Identify As
submenu. Further