background image

National Instruments™, NI™, and ni.com™ are trademarks of National Instruments Corporation. 
Product and company names mentioned herein are trademarks or trade names of their respective 
companies. For patents covering National Instruments products, refer to the appropriate location: 

Help»Patents

 in your software, the 

patents.txt

 file on your CD, or 

ni.com/patents

.

© 2003 National Instruments Corp. All rights reserved.

3

72611

A-01

Oct03

*323697A-01*

What If the NI PXI-8184/8185 Does Not Boot?

Several problems can cause a controller not to boot. Here are some things 
to look for and possible solutions.

Things to Notice

:

Which LEDs come on? The 

Power OK

 LED should stay lit. 

The

Drive

 LED should blink during boot as the disk is accessed.

What appears on the display? Does it hang at some particular point 
(BIOS, Operating System, and so on)? If nothing appears on the 
screen, try a different monitor. Does your monitor work with a 
different PC? If it hangs, note the last screen output that you saw for 
reference when consulting National Instruments technical support.

What has changed about the system? Did you recently move the 
system? Was there electrical storm activity? Did you recently add 
a new module, memory chip, or piece of software?

Things to Try

:

Make sure the chassis is plugged in to a working power source. 

Check any fuses or circuit breakers in the chassis or other power 
supply (possibly a UPS).

Make sure the controller module is firmly seated in the chassis.

Remove all other modules from the chassis.

Remove any nonessential cables or devices.

Try the controller in a different chassis or a similar controller in this 
same chassis.

Recover the hard drive on the controller. (Refer to the 

Hard Drive 

Recovery

 section in the 

NI PXI-8184/8185 User Manual

.)

Clear the CMOS. (Refer to the 

System CMOS 

section in the 

NI PXI-8184/8185 User Manual

.)

For more troubleshooting information, refer to the 

NI PXI-8184/8185 User 

Manual

. The manual is in PDF format on the recovery CD included with 

your controller and on the National Instruments Web site, 

ni.com

.

Reviews: