Figure 2.
Voltage Verification or Adjustment Connection Diagram
DMM
Voltage
Mode
+
–
NI-DCPower Device
Sense LO
Sense HI
HI
LO
2.
Set the
niDCPower Output Function
property or
NIDCPOWER_OUTPUT_FUNCTION
attribute to DC Voltage for the NI 4141.
Verifying Voltage Output and Measurement
Compare a set of voltages measured by the external DMM to both a set of voltage test points
requested by the NI 4141 and to the measured voltages reported by the NI 4141.
Refer to the following table as you complete the following steps.
Table 2.
Voltage Output and Measurement Verification
Level Range Limit Range
and Limit
Test Point
As-Found Output
Test Limit (% of
V Offset)
As-Found Measurement
Test Limit (% of V
Offset)
10 V
1 mA
-10 V
0.013% + 150 μV
0.013% + 150 μV
-7.5 V
5 V
-2.5 V
0 V
2.5 V
5 V
7.5 V
10 V
1.
Set the first specified level range, limit range, and limit on the NI 4141.
2.
Set the level on the NI 4141 to the first specified test point.
3.
Take a voltage measurement using the DMM, and take a voltage measurement using the
NI 4141.
6
|
ni.com
|
NI PXIe-4141 Calibration Procedure
