National Instruments NI PXIe-4141, Calibration Procedure

2.

Call one of the following, specifying Commit in 

calibration close action

:

•

niDCPower Close External Calibration VI

•

niDCPower_CloseExtCal

 function

Reverification

Repeat the 

Verification

 section to determine the as-left status of the device.

Note

If no as-left test limits are specified in a procedure, reuse the as-found test

limits.

Note

If any test fails reverification after performing an adjustment, verify that you

have met the 

Test Conditions

 before returning your device to NI. Refer to the

Worldwide Support and Services

 section for information about support resources or

service requests.

Related Information

Test Conditions

 on page 3

Verification

 on page 2

Worldwide Support and Services

The National Instruments website is your complete resource for technical support. At 

ni.com/

support

, you have access to everything from troubleshooting and application development

self-help resources to email and phone assistance from NI Application Engineers.

Visit 

ni.com/services

 for NI Factory Installation Services, repairs, extended warranty, and

other services.

Visit 

ni.com/register

 to register your National Instruments product. Product registration

facilitates technical support and ensures that you receive important information updates from
NI.

A Declaration of Conformity (DoC) is our claim of compliance with the Council of the
European Communities using the manufacturer’s declaration of conformity. This system
affords the user protection for electromagnetic compatibility (EMC) and product safety. You
can obtain the DoC for your product by visiting 

ni.com/certification

. If your product supports

calibration, you can obtain the calibration certificate for your product at 

ni.com/calibration

.

National Instruments corporate headquarters is located at 11500 North Mopac Expressway,
Austin, Texas, 78759-3504. National Instruments also has offices located around the world.
For telephone support in the United States, create your service request at 

ni.com/support

 or

dial 1 866 ASK MYNI (275 6964). For telephone support outside the United States, visit the

Worldwide Offices

 section of 

ni.com/niglobal

 to access the branch office websites, which

18

  | 

ni.com

  | 

NI PXIe-4141 Calibration Procedure