Physical Characteristics
Weight
131.3 g (4.631 oz)
Safety Voltages
Connect only voltages that are below these limits.
V terminal to C terminal
30 VDC maximum, Measurement Category I
Measurement Category I is for measurements performed on circuits not directly connected to
the electrical distribution system referred to as
MAINS
voltage. MAINS is a hazardous live
electrical supply system that powers equipment. This category is for measurements of voltages
from specially protected secondary circuits. Such voltage measurements include signal levels,
special equipment, limited-energy parts of equipment, circuits powered by regulated low-
voltage sources, and electronics.
Caution
Do not connect the sbRIO-9627 to signals or use for measurements within
Measurement Categories II, III, or IV.
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible
manner. NI recognizes that eliminating certain hazardous substances from our products is
beneficial to the environment and to NI customers.
For additional environmental information, refer to the
Minimize Our Environmental Impact
web page at
ni.com/environment
. This page contains the environmental regulations and
directives with which NI complies, as well as other environmental information not included in
this document.
Waste Electrical and Electronic Equipment
(WEEE)
EU Customers
At the end of the product life cycle, all NI products must be
disposed of according to local laws and regulations. For more information about
how to recycle NI products in your region, visit
ni.com/environment/weee
.
Battery Replacement and Disposal
Cd/Hg/Pb
Battery Directive
This device contains a long-life coin cell battery. If you need to
replace it, use the Return Material Authorization (RMA) process or contact an
NI sbRIO-9627 Specifications
|
© National Instruments
|
13
