A-2
|
ni.com
Appendix A
Specifications
Safety Voltages
Connect only voltages that are no greater than 30 V
rms
/42 V
pk
/60 VDC.
Environmental
Temperature
Operating ..................................................0 to 70 °C
Storage ......................................................–20 to 70 °C
Relative humidity
Operating ..................................................5 to 90% RH, noncondensing
Storage ......................................................5 to 90% RH, noncondensing
Pollution Degree ...............................................2
Maximum altitude.............................................2,000 m
Indoor use only.
Safety
This product meets the requirements of the following standards of safety for electrical equipment
for measurement, control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
Note
For UL and other safety certifications, refer to the product label or the
section.
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for electrical equipment
for measurement, control, and laboratory use:
•
EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions
•
FCC 47 CFR Part 15B: Class A emissions
•
ICES-001: Class A emissions
Note
In the United States (per FCC 47 CFR), Class A equipment is intended for use
in commercial, light-industrial, and heavy-industrial locations. In Europe, Canada,
Australia and New Zealand (per CISPR 11) Class A equipment is intended for use
only in heavy-industrial locations.
Note
Group 1 equipment (per CISPR 11) is any industrial, scientific, or medical
equipment that does not intentionally generate radio frequency energy for the
treatment of material or inspection/analysis purposes.
