INSTALLATION INSTRUCTIONS
NI SCXI -1339
Terminal Block for the NI SCXI-1129
This guide describes how to install and connect signals to the
National Instruments SCXI-1339 terminal block to configure the
SCXI-1129 switch module as a dual 4
×
32 matrix.
Screw terminals on the SCXI-1339 allow you to access each 4
×
32 matrix.
The SCXI-1339 also contains terminals for scanner advanced output and
external input trigger signals.
Refer to the
NI Switches Getting Started Guide
to determine when to install
the terminal block. Visit
ni.com/switches
for information on other
switching solutions.
Conventions
The following conventions are used in this guide:
»
The
»
symbol leads you through nested menu items and dialog box options
to a final action. The sequence
File»Page Setup»Options
directs you to
pull down the
File
menu, select the
Page Setup
item, and select
Options
from the last dialog box.
This icon denotes a note, which alerts you to important information.
This icon denotes a caution, which advises you of precautions to take to
avoid injury, data loss, or a system crash. When this symbol is marked on a
product, refer to the
Read Me First: Safety and Radio-Frequency
Interference
document for information about precautions to take.
bold
Bold text denotes items that you must select or click in the software, such
as menu items and dialog box options. Bold text also denotes parameter
names.
™
̭͈Ρ΅νιϋΠ͉ͅȂུࢊβȜΐ͜܄̞̳ͦ̀͘͘ȃ
