14
|
ni.com
|
NI PXIe-4340 and TB-4340 User Guide and Terminal Block Specifications
Module Removal
Caution
Do
not
remove a module with the power on. Doing so can damage the
module.
To remove the module, refer to Figure 8 while completing the following steps:
Note
To maintain forced air cooling in the PXI Express system, refer to the
Maintain Forced-Air Cooling Note to Users
.
1.
Make sure that the chassis is powered off before removing the module.
2.
Loosen the captive screws on the top and bottom of the module.
Caution
Do
not
pull the front panel to remove the module. Doing so may cause
module components to come into contact with adjacent modules, causing damage to
the modules.
3.
Pull the captive screws to unseat the module and slowly slide the module along the guides.
4.
Replace the filler panel in the empty slot.
5.
Store the module in an antistatic protective bag.
Figure 8.
Removing PXIe-4340 Modules
1
Captive Screws (Use to remove modules.)
2
Front Panel (Do not use to remove modules.)
2
1
NI P
XIe
-1062Q
CO
OLING
CL
EARA
NCE
AND
FAN
FILT
ER
MA
INT
ENA
NCE
RE
QUI
RE
D.
S
EE MA
NU
AL.
NA
TION
AL
INST
RUME
NTS
