NI PXIe-4340 and TB-4340 User Guide and Terminal Block Specifications
|
© National Instruments
|
15
Create a Simulated Device
To run examples without the hardware installed, use an NI-DAQmx simulated device. To create
a simulated device in MAX:
1.
Launch MAX.
2.
Right click
Devices and Interfaces»Create New
.
3.
From the dialog, select
Simulated NI-DAQmx Device or Modular Instrument
.
4.
Type
4340
in the text box at the top of the window.
5.
Select the device from the list provided.
6.
Click
OK
.
More Information
After you install NI-DAQmx, the NI-DAQmx documentation is available from
Start»All
Programs»National Instruments»NI-DAQmx
. Additional resources are online at
You can access online device documentation by right-clicking your module in MAX and
selecting
Help»Online Device Documentation
. A browser window opens to
with the results of a search for relevant documents. If you do not have web access,
documents for supported modules are included on the NI-DAQmx disc.
Troubleshooting
•
Go to
•
If you need to return your National Instruments hardware for repair or device calibration,
go to
rdsenn
to start the Return Merchandise Authorization
(RMA) process.
Specifications (TB-4340)
Note
PXIe-4340 module specifications are located in the
NI PXIe-4340
Specifications
document.
All performance specifications are
typical
unless otherwise noted. These specifications are valid
within the full operating temperature range.
Calibration
Calibration interval ........................................... No calibration
Electrical
Input range........................................................ Refer to
NI PXIe-4340 Specifications
document
