National Instruments NI TB-4340, User Manual

NI PXIe-4340 and TB-4340 User Guide and Terminal Block Specifications

|

© National Instruments

|

3

–

PXI Express chassis

–

Cabling and sensors as required for your application



Tools
–

Number 1 and 2 Phillips-head screwdrivers

–

1/8 in. flathead screwdriver

–

Long-nose pliers

–

Wire cutter

–

Wire insulation stripper



Documentation
–

NI PXIe-4340 and TB-4340

User Guide and Terminal Block Specifications

–

NI PXIe-4340 User Manual

–

NI PXIe-4340 Specifications

–

PXI Express chassis user manual

You can download needed documents from 

ni.com/manuals

.

Installation

Install the Software

Note

You must be an administrator to install NI software and devices on your 

computer.

Ensure that the following software is installed before installing the PXIe-4340 and TB-4340 
hardware:
1.

Your application software, such as LabVIEW, LabWindows

™

/CVI

™

, or .NET.

2.

NI-DAQmx—PXIe-4340 modules were first supported in NI-DAQmx 15.5.

Note

For detailed NI software version support, refer to the 

NI-DAQmx Readme

. 

Back up any applications before upgrading software or modifying the application.

Unpack and Install the Module

Remove the packaging and inspect the module. Contact NI if the module is damaged. Do not 
install a damaged module.

Caution

The module is static sensitive. Always properly ground yourself and the 

equipment when handling or connecting to the module.