National Instruments NI WSN C Series, Getting Started Manual

© 

National Instruments Corp.

13

NI 9795 Getting Started Guide

c. Expand the 

Real-Time CompactRIO 

folder and select the 

NI CompactRIO device type and click 

OK

.

d. Right-click the NI CompactRIO device in the project and 

select 

New»Targets and Devices

. Click 

Discover an 

existing target(s) or device(s)

. 

e. Expand the NI CompactRIO chassis and select the 

NI CompactRIO chassis with the NI 9795 installed that 
you want to use. Click 

OK

 and then select 

Scan Interface

as the Programming Mode of the NI CompactRIO chassis 
and click 

Continue

.

Note

The NI 9795 WSN C Series gateway can only be 

used in a NI CompactRIO chassis that supports the RIO 
Scan Interface (RSI). For more information, go to 

ni.com/info

 and enter 

rdsoftwareversion

. To use 

RSI and FPGA at the same time with a NI 9795 in the 
CompactRIO chassis, go to 

ni.com/kb

 and enter 

4XRBMIUV

.

2. Right-click on the NI CompactRIO device in the project and 

select 

New»Targets and Devices

.

3. Expand 

WSN Node

 and select the nodes for use in the project 

and click 

OK

.