NI-XNET CAN HS/FD Transceiver Cable Instructions
|
© National Instruments
|
19
Specifications
The following specifications are typical for the range -40 to 70 °C
unless otherwise noted.
High-Speed CAN Characteristics
Transceiver........................................ NXP TJA1043T
Max baud rate ................................... 1 Mbps
CAN_H, CAN_L bus lines
voltage............................................... -27 to +40 VDC
MTBF ............................................... Contact NI for Bellcore
MTBF or MIL-HDBK-217F
specifications.
Power Requirements
Thermal dissipation (at 70 °C).......... 550 mW max (active mode);
440 mW typical (active
mode)
Power consumption from
NI-XNET Transceiver Cable host .... 550 mW max (active mode);
440 mW typical (active
mode)