6
|
ni.com
|
NI-XNET CAN HS/FD Transceiver Cable Instructions
The Transceiver Cable is intended to be routed and strain relieved
similar to other cables, and does not require a special mounting
accessory.
Wiring to the NI-XNET CAN HS/FD
Transceiver Cable
The NI-XNET CAN HS/FD Transceiver Cable is used with a
compatible NI-XNET Transceiver Cable host port.
Figure 1.
NI-XNET CAN HS/FD Transceiver Cable Connections
The NI-XNET CAN HS/FD Transceiver Cable has one 9-pin male
D-Sub connector that provides connections to a CAN bus. The
NI-XNET CAN HS/FD Transceiver Cable has pins for CAN_H
and CAN_L, to which you connect the CAN bus signals. Connect
these signals using twisted-pair cable.
The port has two common pins (COM) that are internally
connected to the transceiver cable’s isolated reference and serve as
To CAN B
us
To Tr
a
n
s
ceiver
C
ab
le Ho
s
t
NA
TIONAL
INSTRUMENTS