16
|
ni.com
|
NI-XNET LIN Transceiver Cable Operating Instructions
Note
Measurement Categories CAT I and CAT O
(Other) are equivalent. These test and measurement
circuits are not intended for direct connection to the
MAINs building installations of Measurement
Categories CAT II, CAT III, and CAT IV.
Isolation Voltage
Port-to-earth ground
Continuous ................................. 60 VDC,
Measurement Category I
Note
The NI-XNET LIN Transceiver Cable COM
signals are not connected to the host port ground. This
isolation is intended to prevent ground loops and does not
meet UL ratings for safety isolation.
Safety Standards
This product meets the requirements of the following standards
of safety for electrical equipment for measurement, control, and
laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
