NI-XNET LIN Transceiver Cable Operating Instructions
|
© National Instruments
|
3
Caution
Do
not
operate the NI-XNET LIN Transceiver
Cable in a manner not specified in these operating
instructions. Product misuse can result in a hazard. You
can compromise the safety protection built into the
product if the product is damaged in any way. If the
product is damaged, return it to National Instruments for
repair.
Safety Guidelines for Hazardous Locations
The NI-XNET LIN Transceiver Cable is suitable for use in Class I,
Division 2, Groups A, B, C, D, T4 hazardous locations; Class I,
Zone 2, AEx nA IIC T4 and Ex nA IIC T4 hazardous locations; and
nonhazardous locations only. Follow these guidelines if you are
installing the NI-XNET LIN Transceiver Cable in a potentially
explosive environment. Not following these guidelines may result
in serious injury or death.
Caution
Do
not
disconnect bus-side connector unless
power has been switched off or the area is known to be
nonhazardous.
