background image

Glossary

NI PCIe-1433 User Manual and Specifications

G-2

ni.com

D

DAQ

Data acquisition. (1) Collecting and measuring electrical signals from 
sensors, transducers, and test probes or fixtures and inputting them to a 
computer for processing. (2) Collecting and measuring the same kinds of 
electrical signals with A/D or DIO boards plugged into a computer, and 
possibly generating control signals with D/A and/or DIO boards in the 
same computer.

DMA

Direct memory access. A method by which data can be transferred to and 
from computer memory from and to a device or memory on the bus while 
the processor does something else; DMA is the fastest method of 
transferring data to/from computer memory.

F

frame grabber

A device that digitizes an image and stores it in a computer's memory.

H

handshaking

A type of protocol that makes it possible for two devices to synchronize 
operations.

L

LVDS

Low Voltage Differential Signaling (EIA-644).

N

NI-IMAQ

Driver software for National Instruments frame grabbers.

NI Vision
Acquisition Software

A collection of driver software and utilities that acquire, display, save, and 
monitor images from any NI image acquisition device.

Summary of Contents for PCIe-1433







































Reviews: