©
National Instruments Corporation
A-1
NI PCIe-1433 User Manual and Specifications
A
Specifications
This lists specifications for the NI PCIe-1433. These specifications are
typical at 25 °C, unless otherwise stated.
Features
Supported camera standard .................... Camera Link 1.2
Supported configurations ....................... Base, Medium, Full,
Extended Full
Camera connectors ................................. Two 26-pin MDR
PCI Express Interface
PCI Express compliance ........................ 1.1
Native link width.................................... x4
Up-plugging availability ........................ x8, x16
Note
Some system devices limit data transfer rates for plug-in devices in an up-plugging
configuration. Refer to the documentation provided by the computer manufacturer to
determine if your computer will support a x4 plug-in device at a x4 data rate in a larger slot.
Trigger Characteristics
Number of external trigger I/O lines...... 1
Trigger input
Voltage range .................................. 0 to 5 V (TTL)
Input high voltage .................... 2.0 V
Input low voltage ..................... 0.8 V
Polarity............................................ Programmable, active high or
active low
