Chapter 3
Maintenance
NI PXI-1036/PXI-1036DC User Manual
3-2
ni.com
Cleaning
Caution
Always
disconnect the AC power cable (and the DC power cable, if you are
working with a PXI-1036DC chassis) before cleaning or servicing the chassis.
Cleaning procedures consist of exterior and interior cleaning of the chassis.
Refer to your module user documentation for information on cleaning
individual CompactPCI or PXI modules.
Interior Cleaning
Use a dry, low-velocity stream of air to clean the interior of the chassis.
Use a soft-bristle brush for cleaning around components.
Exterior Cleaning
Cautions
Avoid getting moisture inside the chassis during exterior cleaning, especially
through the top vents. Use just enough moisture to dampen the cloth.
Do
not
wash the front- or rear-panel connectors or switches. Cover these components while
cleaning the chassis.
Do
not
use harsh chemical cleaning agents; they may damage the chassis. Avoid chemicals
that contain benzene, toluene, xylene, acetone, or similar solvents.
Clean the exterior surfaces of the chassis with a dry lint-free cloth or a
soft-bristle brush. If any dirt remains, wipe with a cloth moistened in a mild
soap solution. Remove any soap residue by wiping with a cloth moistened
with clear water. Do
not
use abrasive compounds on any part of the chassis.
