National Instruments PXI-5154 Getting Started Manual Download | Manualshive

Page: 1 / 16

background image

GETTING STARTED GUIDE

PXI/PCI-5154

2 GS/s Oscilloscope

Note

Before you begin, install and configure your chassis and controller.

This document explains how to install, configure, and test the PXI/PCI-5154. The
PXI/PCI-5154 high-speed oscilloscope features 1 GHz analog bandwidth and up to 2 GS/s
real-time sample rate (20 GS/s equivalent-time sample rate for repetitive signals).

To access PXI/PCI-5154 documentation, navigate to

Start

»

All Programs

»

National

Instruments

»

NI-SCOPE

»

Documentation

.

Caution

You can impair the protection provided by the PXI/PCI-5154 if you use it

in a manner not described in this document.

Contents

Electromagnetic Compatibility Guidelines...............................................................................2
Verifying the System Requirements..........................................................................................2
Unpacking the Kit..................................................................................................................... 2

Kit Contents...................................................................................................................... 3

Other Equipment....................................................................................................................... 3
Preparing the Environment....................................................................................................... 4

PXI Modules..................................................................................................................... 4
PCI Modules..................................................................................................................... 4

Installing the Software.............................................................................................................. 4
Installing the PXI-5154.............................................................................................................5
Installing the PCI-5154............................................................................................................. 6
PXI/PCI-5154 Front Panel Connectors and Indicators............................................................. 8
Configuring the PXI/PCI-5154 in MAX...................................................................................9
Programming the PXI/PCI-5154.............................................................................................10

NI-SCOPE Examples...................................................................................................... 11

Making a Measurement...........................................................................................................12

Making a Measurement with NI-SCOPE SFP................................................................12
Making a Measurement with LabVIEW.........................................................................12

Setting Up PXI/PCI-5154 for Synchronization...................................................................... 12

PXI Modules................................................................................................................... 13
PCI Modules................................................................................................................... 13

Troubleshooting...................................................................................................................... 13

Why Is the ACCESS LED Off When the Chassis Is On?...............................................13
What Should I Do if the PXI/PCI-5154 Doesn't Appear in MAX?................................ 14

1
2
3
...
»

Summary of Contents for PXI-5154

















Reviews:

No comments

Related manuals for PXI-5154

Brand: UnionSpecial Pages: 56

Brand: Tanco Pages: 72

Brand: HABYS Pages: 16

Brand: Acterna Pages: 72

Brand: zipwake Pages: 2

Brand: zipwake Pages: 2

Brand: Panasonic Pages: 9

Brand: Faderfox Pages: 8

Brand: Pari Pages: 11

Brand: Pari Pages: 2

Brand: Haas Pages: 5

Brand: Zodiac Pages: 2

Brand: Zipper Mowers Pages: 37

Brand: Zimmer Pages: 46

Brand: VanGaa Lighting Pages: 7

GPSMAP 7400 Series

Brand: Garmin Pages: 8

Brand: Walimex Pro Pages: 44

Brand: Otto Bock Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands