National Instruments PXI-5154 Getting Started Manual Download

Page: 10 / 16

Do one of the following to connect a signal to the device:
•

Connect an external signal by clicking

Auto

or by selecting the appropriate

device parameters for the signal, or

•

Connect a cable from PFI 1 to an input channel and select

Utility

Probe

Compensation

from the SFP menu. Click

Auto

to display a 1 kHz square

wave.

Note

The PXI/PCI-5154 has self-calibration capabilities, which you can

access programmatically with NI-SCOPE and your ADE, or interactively with
NI-SCOPE SFP or MAX.

Related Information

Making a Measurement

on page 12

What Should I Do if the Module Fails the Self-Test?

on page 14

What Should I Do if the PXI/PCI-5154 Doesn't Appear in MAX?

on page 14

Programming the PXI/PCI-5154

You can acquire data interactively using the NI-SCOPE SFP, or you can use the NI-SCOPE
instrument driver to program your device in the supported ADE of your choice.

ni.com

PXI/PCI-5154 Getting Started Guide

Summary of Contents for PXI-5154

















Search results

Summary of Contents for PXI-5154

Reviews:

Related manuals for PXI-5154

Brands by name

Popular brands

National Instruments PXI-5154, Getting Started Manual

Search results

Summary of Contents for PXI-5154

Reviews:

Related manuals for PXI-5154

Brands by name

Popular brands