National Instruments PXI-5154 Getting Started Manual Download

Page: 3 / 16

Kit Contents

Figure 1. PXI/PCI-5154 Kit Contents

1. Hardware Module
2. Driver Software DVD
3. Screw Kit, part number 191306A-01 (ships only

with PCI kit)

4. Getting Started Guide (this document)
5. Maintain Forced-Air Cooling Note to Users
6. Export Compliance Note to Users

Other Equipment

There are several required items not included in your device kit that you need to operate the
PXI/PCI-5154. Your application may require additional items not included in your kit to install
or operate your device.
•

(PXI Devices) A PXI chassis, a PXI/SCXI combination chassis, or a PXI/CompactPCI
chassis with a controller and the chassis documentation

•

(PCI Devices) A desktop computer and its documentation

Note

If your application uses NI-TClk synchronization for PCI devices, you must

use a RTSI cable to connect the PCI devices. For more information, refer to

High-Speed Digitizers Help

Programming

Reference

NI-TClk

Synchronization Help

Optional Items

•

PXI Chassis Slot Blocker kit (NI part number 199198-01)

•

SMB (m)-to-SMB (m) cables

PXI/PCI-5154 Getting Started Guide

Summary of Contents for PXI-5154

















Search results

Summary of Contents for PXI-5154

Reviews:

Related manuals for PXI-5154

Brands by name

Popular brands

National Instruments PXI-5154, Getting Started Manual

Search results

Summary of Contents for PXI-5154

Reviews:

Related manuals for PXI-5154

Brands by name

Popular brands