background image

Preparing the Environment

Ensure that the environment you are using the NI 5695 in meets the following specifications.

............................................................................

Operating temperature

0 to 55 °C

............................................................................

Operating humidity

10% to 90% RH, noncondensing

............................................................................

Pollution Degree

2

............................................................................

Maximum altitude

2,000 m

Indoor use only.

Note

 

Refer to the device specifications on 

ni.com/manuals

 for complete

specifications.

Note

 

Do not operate the device in a manner not specified in this document.

Product misuse can result in a hazard. You can compromise the safety protection
built into the product if the product is damaged in any way. If the product is
damaged, return it to National Instruments for repair.

Verifying the System Requirements

To use the NI-5690 instrument driver, your system must meet certain requirements.

For more information about minimum system requirements, recommended system, and
supported application development environments (ADEs), refer to the product readme, which
is available on the driver software media or online at 

ni.com/updates

.

Verifying the Kit Contents

Figure 1.

 NI 5695 Kit Contents

1

3

4

2

1. NI 5690 Module
2. SMA Cable

3. NI-5690 Driver Software Media
4. NI PXI-5695 Getting Started Guide (this

document)

NI PXI-5695 Getting Started Guide

  | 

© National Instruments

  | 

3

Summary of Contents for PXI-5695















Reviews: