© National Instruments
|
A-1
A
Specifications
This appendix contains specifications for the PXIe-1066DC chassis.
Caution
Specifications are subject to change without notice.
Electrical
Input voltage range ........................................... 210 to 300 VDC
Input current rating ........................................... 3.5 to 6.0 A
Over-current protection .................................... 10 A power supply fuse, nonreplaceable
Efficiency.......................................................... 70% typical
Power disconnect.............................................. The DC power cable provides main power
disconnect. The front panel power switch causes
the internal chassis power supply to provide DC
power to the CompactPCI/PXI Express
backplane. You also can use the front panel
terminal block 4-pin connector and power mode
switch to control the internal chassis power
supply.
DC Output
DC current capacity (I
MP
)
Note
Maximum co12 V and -12 V power is 588 W.
Note
Maximum total available power is 880 W.
Voltage
Maximum Current
+3.3 V
50 A
+5 V
42 A
+12 V
50 A
-12 V
4 A
5 V
AUX
1.5 A
