Chapter 2
Installation and Configuration
NI PXIe-1071 User Manual
2-8
ni.com
Figure 2-4.
Installing a PXI Express System Controller
4.
When you begin to feel resistance, push up on the injector/ejector
handle to seat the system controller fully into the chassis frame. Secure
the system controller front panel to the chassis using the system
controller front-panel mounting screws.
5.
Connect the keyboard, mouse, and monitor to the appropriate
connectors. Connect devices to ports as required by your system
configuration.
6.
Power on the chassis. Verify that the system controller boots. If the
system controller does not boot, refer to your system controller user
manual.
1
System Controller Front Panel Mounting Screws (4×)
2
NI PXI Express System Controller
3
Injector/Ejector Handle
4
NI PXIe-1071 Chassis
1
2
3
4
NI
PX
Ie-1
071
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
