12
|
ni.com
|
NI PXIe-1086 Getting Started Guide
Complete the following steps to remove a power supply from the rear of the chassis, as shown
in Figure 7:
Caution
Before handling the power supply, allow the fan to stop spinning.
1.
Disengage the two captive screws on the rear of the power supply with a flat-blade screwdriver.
2.
Extend the collapsible handle and pull the power supply out of the chassis.
Figure 7.
Removing Power Supply from NI PXIe-1086 Chassis
1
Power Supply
2
Captive Screw
3
Collapsible Handle
1
3
2
2