8
|
ni.com
|
NI PXIe-1086 Getting Started Guide
3.
When you begin to feel resistance, pull up on the injector/ejector handle to seat the system
controller fully into the chassis frame. Secure the system controller front panel to the
chassis using the system controller front panel mounting screws.
The following figure shows a PXI Express system controller installed in the system
controller slot of a chassis.
Figure 5.
PXI Express System Controller Installed in an NI PXIe-1086 Chassis
4.
Connect the keyboard, mouse, and monitor to the appropriate connectors. Connect devices
to ports as required by your system configuration.
5.
Power on the chassis. Verify that the system controller boots. If the system controller does
not boot, refer to the
Troubleshooting
section or your system controller user manual.
1
NI PXIe-1086 Chassis
2
PXI Express System Controller
3
Injector/Ejector Rail
1
2
3
NI P
XI
e-1
086
