10
|
ni.com
|
PXIe-4844 Installation Guide and Specifications
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for electrical equipment
for measurement, control, and laboratory use:
•
EN 63126-1 (IEC 61326-1): Class A emissions, Basic immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions
•
FCC 47 CFR Part 15B: Class A emissions
•
ICES-001: Class A emissions
Note
For EMC declarations and certifications, refer to the
Online Product
Certification
section.
Laser Compliance
This product meets the requirements of the following laser compliance standards for electrical
equipment for measurement, control, and laboratory use:
•
IEC 60825-1, ED 2.0, 2007-03; US CDRH 21 CFR Subchapter J
CE Compliance
This product meets the essential requirements of applicable European Directives as follows:
•
2014/35/EU; Low-Voltage Directive (safety)
•
2014/30/EU; Electromagnetic Compatibility Directive (EMC)
Online Product Certification
To obtain product certifications and the Declaration of Conformity (DoC) for this product, visit
ni.com/certification
, search by module number or product line, and click the
appropriate link in the Certification column.
Shock and Vibration
Mechanical shock
Operating
(IEC 60068-2-7 Annex A,
section A.4, Table A.1) .............................15 g peak, half-sine, 11 ms pulse
Non-operating (IEC 60068-2-7) ...............25 g peak, half-sine, 11 ms pulse
Random vibration
Operating (ETSI 300 019-2-3)..................0.15 g
rms
, 5 Hz to 100 Hz
Non-operating (IEC 60068-2-64) .............0.8 g
rms
, 10 Hz to 150 Hz
