PXIe-4844 Installation Guide and Specifications
|
© National Instruments
|
11
Environmental
This device is intended for indoor use only.
Caution
Do not exceed the operating temperature, even when using the module in
a chassis with a higher temperature range.
Operating temperature
(IEC 60068-2-1, IEC 60068-2-2) ..................... 0 °C to 55 °C
Storage temperature
(IEC 60068-2-1, IEC 60068-2-2) ..................... -40 °C to 70 °C
Operating humidity (IEC 60068-2-56) ............. 10% to 90%, noncondensing
Storage humidity (IEC 60068-2-56)................. 5% to 95%, noncondensing
Maximum altitude............................................. 2,000 m
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible
manner. NI recognizes that eliminating certain hazardous substances from our products is
beneficial to the environment and to NI customers.
For additional environmental information, refer to the
Minimize Our Environmental Impact
web
page at
ni.com/environment
. This page contains the environmental regulations and
directives with which NI complies, as well as other environmental information not included in
this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
At the end of the product life cycle, all products
must
be sent to
a WEEE recycling center. For more information about WEEE recycling centers,
National Instruments WEEE initiatives, and compliance with WEEE Directive
2002/96/EC on Waste and Electronic Equipment, visit
ni.com/environment/
weee
.
⬉ᄤֵᙃѻક∵ᶧࠊㅵ⧚ࡲ⊩ ˄Ё
RoHS
˅
Ёᅶ᠋
National Instruments
ヺড়Ё⬉ᄤֵᙃѻકЁ䰤ࠊՓ⫼ᶤѯ᳝ᆇ⠽䋼ᣛҸ
(RoHS)
DŽ݇Ѣ
National Instruments
Ё
RoHS
ড়㾘ᗻֵᙃˈ䇋ⱏᔩ
ni.com/
environment/rohs_china
DŽ
(For information about China RoHS compliance,
go to
ni.com/environment/rohs_china
.)