4
|
ni.com
|
PXIe-4844 Installation Guide and Specifications
4. Remove the protective plastic covers from the four front panel mounting screws on the
module, as shown in Figure 1.
Figure 1.
Removing Protective Screw Caps
5. Make sure the PXIe-4844 injector/ejector handle is in its downward position.
6. Identify two side-by-side empty chassis slots, except for a PXI Express System Controller
slot. Of these two slots, the left-most slot must be one of the following PXI Express slots:
PXI Express Peripheral Slot—a PXI Express slot marked with a solid circle
containing the slot number.
PXI Express Hybrid Peripheral Slot—a PXI Express hybrid slot marked with the
letter “H” and a solid circle containing the slot number.
PXI Express System Timing Slot—a PXI Express timing slot marked with a
square surrounding a solid circle containing the slot number.
7. Remove the filler panels covering the selected slots.
8. Align the PXIe-4844 with the card guides on the top and bottom of the selected slots.
1
Protective Screw Cap (4x)
1
8
7
H
10
