NI PXIe-4844 Installation Guide and Specifications
8
ni.com
Laser Compliance
This product meets the requirements of the following laser compliance standards for electrical
equipment for measurement, control, and laboratory use:
•
IEC 60825-1, ED 2.0, 2007-03; US CDRH 21 CFR Subchapter J
CE Compliance
This product meets the essential requirements of applicable European Directives as follows:
•
2006/95/EC; Low-Voltage Directive (safety)
•
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Online Product Certification
To obtain product certifications and the Declaration of Conformity (DoC) for this product, visit
ni.com/certification
, search by module number or product line, and click the appropriate link
in the Certification column.
Shock and Vibration
Mechanical shock
Operating
(IEC 60068-2-7 Annex A,
section A.4, Table A.1) ..................................15 g peak, half-sine, 11 ms pulse
Non-operating (IEC 60068-2-7) ....................25 g peak, half-sine, 11 ms pulse
Random vibration
Operating (ETSI 300 019-2-3).......................0.15 g
rms
, 5 to 100 Hz
Non-operating (IEC 60068-2-64) ..................0.8 g
rms
, 10 to 150 Hz
Environmental
This device is intended for indoor use only.
Caution
Do
not
exceed the operating temperature, even when using the module in a chassis with a
higher temperature range.
Operating temperature
(IEC 60068-2-1, IEC 60068-2-2)...........................0 °C to 55 °C
Storage temperature
(IEC 60068-2-1, IEC 60068-2-2)...........................–40
°
C to 70
°
C
Operating humidity (IEC 60068-2-56) ..................10% to 90%, noncondensing
Storage humidity (IEC 60068-2-56) ......................5% to 95%, noncondensing
Maximum altitude..................................................2,000 m
