Verifying the System Requirements
To use the LabVIEW Instrument Design Libraries for Reconfigurable Oscilloscopes
instrument driver, your system must meet certain requirements.
Refer to the product readme, which is available on the driver software media or online at
, for more information about minimum system requirements, recommended
system, and supported application development environments (ADEs).
Unpacking the Kit
Refer to the following figure to identify the contents of the PXIe-5164 kit.
Figure 1. PXIe-5164 Kit Contents
1
3
4
2
NI P
XIe-5164
1. PXIe-5164
2. PXIe-5164 Safety, Environmental, and Regulatory
Information
3. PXIe-5164 Getting Started Guide (this document)
4. Maintain Forced-Air Cooling Note to Users
Notice
To prevent electrostatic discharge (ESD) from damaging the module,
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1.
Touch the antistatic package to a metal part of the computer chassis.
2.
Remove the module from the package and inspect it for loose components or other signs
of damage.
Notice
Never touch the exposed pins of connectors.
Note
Do not install a module if it appears damaged in any way.
3.
Unpack any other items and documentation from the kit.
Store the module in the antistatic package when the module is not in use.
2
|
ni.com
|
PXIe-5164 Getting Started Guide
