What Should I Do if the PXIe-5170/5171 Fails the Self-
Test or Self-Calibration?
1.
Restart the system.
2.
Launch MAX, and perform the self-test or self-calibration again.
3.
Power off the chassis.
4.
Reinstall the failed module in a different slot.
5.
Power on the chassis.
6.
Perform the self-test or self-calibration again.
Where To Go Next
After you have installed your hardware, configured the module in MAX, and taken a basic
measurement, you can begin programming your hardware using the instrument design
libraries, NI-SCOPE, or custom logic. Refer to the following list for resources and information
that you may need as you create your application.
more about your products through
ni.com.
NI Oscilloscopes
ni.com/digitizers
Services
ni.com/services
Updates
ni.com/updates
*This item is also installed with the driver software.
Device information is also located in the
NI High-Speed Digitizers Help
.
†
DISCOVER
Support
ni.com/support
custom applications within
an application programming
interface (API).
Instrument Design Libraries
Reconfigurable Oscilloscope
Sample Projects*
about hardware features
or review device
specifications.
the application
development environment (ADE)
for your application.
LabVIEW 2015 FPGA
Module Help
NI Reconfigurable
Oscilloscopes Help*
†
Getting Started with
LabVIEW
Located online at
ni.com/manuals
NI PXIe-5170R
14-Bit Oscilloscope
EXPLORE
LEARN
CREATE
NI PXIe-5170R
Specifications* or
NI PXIe-5171R
Specifications*
NI-SCOPE
NI-SCOPE Examples*
16
|
ni.com
|
PXIe-5170/5171 Getting Started Guide
