background image

Figure 4. Resources for the PXIe-5423

*This item is also installed with the driver software.

EXPLORE

LEARN

CREATE

DISCOVER

the application development

environment (ADE)

for your application.

about hardware features

or review specifications.

custom applications with

an application programming

interface (API).

more about your products through ni.com.  

Services
ni.com/services

NI Community
ni.com/community

Support
ni.com/support

Waveform Generator
Solutions
ni.com/waveform-generators

Getting Started with
LabWindows/CVI 

Learn LabVIEW Basics 

NI Signal Generators Help*

PXIe-5423 Specifications*

NI-FGEN Soft Front Panel
NI-FGEN Instrument Driver

NI-FGEN Examples*

Located online at ni.com/manuals

Located using the NI Example Finder

Located at ni.com/gettingstarted 

20 MHz 16-Bit AWG

NI PXI-5413

PXIe-5423 Firmware Licensing

Software is licensed pursuant to the software license agreements provided with the software
or, in the absence of such license agreements, the National Instruments Software License
Agreement available at 

ni.com/legal

 at the time of purchase.

For a copy of the software licenses applicable to the firmware for this hardware product, as
well as copies of third party licenses and any required notices shipped with the firmware, visit 

ni.com/info

 and enter the Info Code 

PXIe5423ThirdPartyLicensing

.

Worldwide Support and Services

The NI website is your complete resource for technical support. At 

ni.com/support

, you have

access to everything from troubleshooting and application development self-help resources to
email and phone assistance from NI Application Engineers.

Visit 

ni.com/services

 for NI Factory Installation Services, repairs, extended warranty, and

other services.

16

  | 

ni.com

  | 

PXIe-5423 Getting Started Guide

Summary of Contents for PXIe-5423



















Reviews: