National Instruments PXIe-5632, Getting Started Manual

Table 1.

 NI 5632 Accessories

Accessory

Part Number

Manual VNA Calibration Kit, K-Type

781587-01

Manual VNA Calibration Kit, N-Type

781588-01

Automatic VNA Calibration Kit, K-Type, Male-Female, 70 KHz to 9 GHz

782364-01

Phase-Equal Precision Adapter Kit, K-Type

781595-01

Phase-Equal Precision Adapter Kit, N-Type

781596-01

Precision Coaxial Cable, 0.6 m, K-Type, Male-Male

781607-01

Precision Coaxial Cable, 0.6 m, K-Type, Male-Female

781608-01

Precision Coaxial Cable, 0.6 m, K-Type Male to N-Type Male

781609-01

Precision Coaxial Cable, 0.6 m, K-Type Male to N-Type Female

781610-01

Calibrated 5/16" Torque Wrench, 8 in-lbs (0.9 Nm)

781615-01

Preparing the Environment

Ensure that the environment you are using the NI 5632 in meets the following specifications.

............................................................................

Operating ambient temperature
(IEC-60068-2-1, IEC-60068-2-2)

0 °C to 55 °C

............................................................................

Operating relative humidity
(IEC-60068-2-56)

10% to 90%, noncondensing

............................................................................

Maximum altitude

2,000 m (800 mbar) (at 25 °C ambient
temperature)

............................................................................

Pollution Degree

2

Indoor use only.

Caution

Clean the hardware with a soft, nonmetallic brush. Make sure that the

hardware is completely dry and free from contaminants before returning it to
service.

Note

Refer to the 

NI PXIe-5632 Specifications

 at 

ni.com/manuals

 for complete

specifications.

4

  | 

ni.com

  | 

NI PXIe-5632 Getting Started Guide