Figure 9. Basic Sine Wave Generation VI Block Diagram
Figure 10. Basic Sine Wave Generation VI Front Panel
3.
Open the VI front panel, and select the PXIe-5654 module name specified in MAX in the
resource name
control.
4.
Click the
Run
button on the toolbar to initiate sine wave generation.
5.
Click the VI front panel
STOP
button to stop sine wave generation.
You have successfully generated a continuous sine wave signal using the NI-RFSG instrument
driver and the PXIe-5654.
PXIe-5654 Getting Started Guide
|
© National Instruments Corporation
|
15