Store the device in the antistatic package when the device is not in use.
PXIe-5763 Kit Contents
The following items are included in the device kit:
•
The PXIe-5763
•
The FlexRIO Support driver software media
•
Documentation:
–
Maintain Forced-Air Cooling Note to Users
–
PXIe-5763 Getting Started Guide
(this document)
Preparing the Environment
Ensure the environment in which you are using the PXIe-5763 meets the following
specifications.
Operating environment
Ambient temperature range
0 °C to 45 °C (Tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2. Meets
MIL-PRF-28800F Class 3 low temperature
limit and MIL-PRF-28800F Class 4 high
temperature limit.)
Relative humidity range
10% to 90%, noncondensing (Tested in
accordance with IEC 60068-2-56.)
Maximum altitude
2,000 m (800 mbar) (at 25 °C ambient
temperature)
Pollution Degree
2
Indoor use only.
Note
For complete specifications, refer to the specifications document for your
.
Installing the Application Software and Driver
Before installing your hardware, you must install the application software and instrument
driver. Visit
NI FlexRIO Driver Supported Versions for FlexRIO Adapters and Modules
determine which minimum software versions you need for your device. Install the software in
the following order:
1. Install LabVIEW.
4
|
ni.com
|
PXIe-5763 Getting Started Guide
Summary of Contents for PXIe-5763
Page 1: ...PXIe 5763...
