Figure 2. Clearing the CMOS Contents
1
1. Push-Button Switch SW1
Boot Options
The PXIe-8821 can boot from the following devices:
•
The internal Serial ATA hard drive
•
An external SCSI hard drive or SCSI CD/DVD-ROM if an SCSI adapter, such as the
PXI-8214, is used.
•
A network PXE server on the same subnet.
•
An external USB mass storage device such as a USB hard drive, USB CD/DVD-ROM, or
USB flash drive.
•
An external USB floppy drive.
•
Most PCI or PCI Express-based devices that provide an Option ROM.
Note
There are some limitations when booting from a USB device. You can install
Windows 7 and later from a USB CD/DVD-ROM, but not earlier versions of
Windows. The PXIe-8821 BIOS configures the USB devices so that they work in a
DOS environment.
PXIe-8821 User Manual
|
© National Instruments
|
17
