radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by NI could
void your authority to operate it under your local regulatory rules.
Notice
Operate this product only with shielded cables and accessories. Do not use
unshielded cables or accessories unless they are installed in a shielded enclosure
with properly designed and shielded input/output ports and connected to the product
using a shielded cable. If unshielded cables or accessories are not properly installed
and shielded, the EMC specifications for the product are no longer guaranteed.
Electromagnetic Compatibility Standards
This product meets the requirements of the following EMC standards for electrical equipment
for measurement, control, and laboratory use:
•
EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions
Note
In the United States (per FCC 47 CFR), Class A equipment is intended for
use in commercial, light-industrial, and heavy-industrial locations. In Europe,
Canada, Australia, and New Zealand (per CISPR 11), Class A equipment is intended
for use only in heavy-industrial locations.
Note
Group 1 equipment (per CISPR 11) is any industrial, scientific, or medical
equipment that does not intentionally generate radio frequency energy for the
treatment of material or inspection/analysis purposes.
Note
For EMC declarations, certifications, and additional information, refer to the
Product Certifications and Declarations
4
|
ni.com
|
SCB-12 User Guide