SCXI Quick Start Guide
Signal Conditioning eXtensions for Instrumentation
This document contains English, French, and German language instructions. For Japanese,
Korean, and Simplified Chinese language instructions, refer to the other document in your kit.
Ce document contient des instructions en anglais, français et allemand. Pour les consulter en
japonais, coréen et chinois simplifié, reportez-vous à l’autre document dans votre kit.
Dieses Dokument enthält Anleitungen auf Englisch, Französisch und Deutsch. Anleitungen auf
Japanisch, Koreanisch und in vereinfachtem Chinesisch finden Sie in dem anderen Dokument in
diesem Kit.
This document explains how to install and configure SCXI signal conditioning modules in
SCXI-1000, SCXI-1001, SCXI-1000DC, or PXI/SCXI combination chassis, confirm the
module and chassis are operating properly, and set up multichassis systems. It also describes the
NI-DAQmx software relative to SCXI and integrated signal conditioning products. This
document assumes you have already installed, configured, and tested your NI application and
driver software, and the data acquisition (DAQ) device to which you will connect the SCXI
module. If you have not, refer to the
DAQ Getting Started
guides included with the DAQ device
and available on the NI-DAQ software media and from
ni.com/manuals
, before continuing.
For instructions on configuring Traditional NI-DAQ (Legacy), refer to the
Traditional NI-DAQ
(Legacy) Readme
after you have installed the software. Refer to the
NI Switches Getting Started
Guide
, available at
ni.com/manuals
, for switch information.
Step 1. Unpack the Chassis, Module, and
Accessories
Remove the chassis, module, and accessory from the packaging and inspect the products for
loose components or any sign of damage. Notify NI if the products appear damaged in any way.
Do
not
install a damaged device.
™
Summary of Contents for SCXI-116 Series
Page 1: ...SCXI 1143...
